Glossary

PDQ = Product design Quoter

CE = Customer Experience representative

SME = Subject matter expert

RSM = Regional Sales Manager – Sale our products – Everidge employee

Dealers = Purchase our walk-ins

Consultant = Designs and overseas creating the written specifications for a project – (Mainly used on Thermalrite)

Reps = Make commission from sales – middleman – Non Everidge employee

• Sanitary hands-free option
• Simplifies walk-in entry when hands are full
• Designed for high-traffic pull handle doors only
• Non-skid pedal surface
• Aluminum construction
• Durable 304 stainless steel pivot pin and nylon bushing for smooth operation
• Retrofit kit available
• Temperature range: -40°F to 150°F (-40°C to 66°C)
• Designed for 1/4” diameter flathead fasteners
• Flush mount, right and left hand door installation

• High tension closer recommended for doors exceeding 200 lb. (90.7kg)
• Spring tension can be set to close door under a wide range of conditions
• Roller rod guide assures smooth operation with either rise or fixed pin hinges
• Invert for left-hand applications

CAUTION: For operator safety, Model No. 1097 door closer is intended to be used where high force is necessary to close heavy doors. Mount door closer as low as possible. Do not use door closer winding mechanism to hold doors open.

• Operates by direct force adding to natural swing momentum of closing door
• Designed to overcome slowing action of gaskets and air pressure
• Provides fast, full closure for heavy walk-in doors
• Easy installation; simply snaps onto concealed mounting plate
• Simple spring mechanism gives long, trouble-free life
• Solid steel housing and bend-resistant hook assure long wear in heavy use
• Rubber roller ensures quiet operation
• Ideal complement for Kason Walk-in door hardware to provide self-closing doors

• Replacement for the 1845 High Flow Intelli-Vent^® Heated Pressure Relief Port
• High-flow capacity for walk-in freezers and coolers
• Integrated low-wattage heat sinks reduces condensation and
  improves frost resistance
• Dual port staged valves adjust for exceptional pressure equalization
  and improved operation
• Consumes less energy than competitive models of same airflow capacity
• Rated to -30°F internal temperature of freezer
• Retrofitable with discontinued Kason 1845 Pressure Relief Ports

• Protects from structural damage because of temperature/pressure build up
• Compensates for air expansion and contraction
• Heated models available for freezer applications

• Protects from structural damage because of temperature/pressure build up
• Compensates for air expansion and contraction
• Heated models available for freezer applications

• Higher flow and easier spring than similar 1830 vent
• Protects from structural damage because of temperature/pressure build up
• Compensates for air expansion and contraction

• Replacement for 1825 Port
• Compact design to fit in tight spaces with improved flow capacity
• Dual port staged valves adjust to airflow conditions making entry/exit easier
• Heater coupled directly to louver mitigates frost accumulation
• 4” to 6” telescopic adjustment provides flexibility for multiple wall thicknesses
• High-flow capacity for walk-in coolers up to 7,000 cf and freezers up to 3,500 cf (per port)

• Deadbolt security for walk-ins at the economy of a locking pull handle
• Deadbolt is secured using cylinder lock or padlock, or both
• Deadbolt can be locked in open position
• Self-adjusts to wall thickness variations
• Standard, twist-off glow in the dark inside release knob prevents lock-ins
• Two 1/4 turn inside release options meet ADA requirements for fast exit
• Locking mechanism located outside resists freeze-up
• Flush offset and 4” thick wall standard. Other wall thicknesses available. Consult factory. 1-5/8” offset option listed in model number table; Available down to 1/2”

• Glow-in-the-dark knob
• ADA Compliant (when used with appropriate latch)

0481S SAFETY GLOW INSIDE RELEASE HANDLE:

• Stainless steel version of 0481, for use with 0056 stainless steel latch

• Classic compact rear mounting pull handle
• Front or rear-mounting models available
• Solid die-cast zinc construction for strength and endurance
• Easily interchangeable with other popular handles